HyperKewl™ Evaporative Insert
Keeping cool - the HyperKewl™ Evaporative cooling material absorbs & slowly releases water through evaporation to help ‘super charge’ the body’s natural cooling process
Only works with Tilley T4MO-1 Hiker's Hat because of the mesh secrete pocket in the hat.
How to use your HyperKewl™ Evaporative Insert:
- Submerge the insert in cold clear water for up to 5 minutes, wipe away excess water and insert into the hat.
- The airflow through the mesh panel in the Hikers hat will start the evaporative cooling process. The cooling insert is expected to provide temperatures that are approx. 10 to 15 degrees Fahrenheit cooler than ambient temperature depending on airflow.
- It will not feel like an air-conditioner on your head – it will super charge the natural evaporation process to help you feel comfortable on the trail. High humidity will diminish the fabric’s ability to evaporate water.
- Re-activate by following the steps as needed.
For Hikers hats only.
- S (6 7/8 to 7 1/8)
- M (7 ¼ to 7 3/8)
- L (7 ½ to 7 5/8)
- XL (7 7/8 to 8+)
Made in China
100% polyester mesh on the outside; interior is 53% polymer fibres; 47% cellulose fibres
Remove HyperKewl™ insert before washing hat. Machine wash in cool water, delicate cycle or hand wash; lay flat or hang and air-dry. Do not wring out, do not bleach, do not iron, do not dry clean.